DK-811885R Instructions
Parts Included
Attention: Failure to install the included dust boots may damage shafts and seals, resulting in leakage and voided warranty coverage.
1. Raise the vehicle and prepare for installation
a. Safely support the vehicle and remove the rear wheels.
2. Remove the shocks
a. Remove the lower shock hardware. Do not discard.
b. Remove the upper shock hardware.
c. Remove the shock from the vehicle.
3. Install the Dirt King shocks
a. Install the upper shock stem into the upper mount. Ensure the shock stem is centered in the mount and torque the nut to 18 ft lbs. Shocks are not side-specific.
b. Install the lower shock hardware and torque to 72 ft lbs.
c. Note: The shock upper mount stem must be installed and torqued before the lower mount.
4. Inspect your work
a. Thoroughly go over your work, then repeat steps for the other side of the vehicle.
b. Reinstall wheels and torque the lug nuts to your manufacturer's specs.
For warnings and disclaimers, visit Dirt King Disclaimer.
