DK-818885R Instructions
Parts Included
Attention: Failure to install the included dust boots may damage shafts and seals, resulting in leakage and voided warranty coverage.
1. Gather Tools needed for the Job
a. Gather tools needed for the job:
- Breaker bar
- 19 mm wrench
- 22 mm wrench
- 19 mm socket
- 17 mm socket
- Torque wrench
2. Raise vehicle
a. Safely raise the vehicle by the frame and support the rear axle.
b. Remove the rear tires.
3. Shock hardware removal
a. Remove the lower shock mounting hardware.
4. Shock hardware removal (continued)
a. Remove the upper shock mounting hardware.
5. Shock removal
a. Remove the shock from the vehicle.
6. Factory bushing installation (recommended)
a. Install the included sleeve onto the top stem.
7. Factory bushing installation (continued)
a. Install the factory lower bushing in the same orientation as removed.
8. Install included bushings (optional)
a. While the OE bushings are recommended, the included bushings can be used if needed. Using the included bushings does not require the additional sleeve.
9. Install shock
a. Insert the DK shock into the upper shock mount and ensure the locating ridges of the bushings are centered within the mount.
b. Torque the upper shock mounting hardware to 18 ft-lbs.
10. Install shock (continued)
a. Install the lower shock mounting hardware and torque to 72 ft-lbs.
11. Review work and repeat on opposite side
a. Inspect all components to ensure they are properly installed and have adequate clearance.
b. Reinstall the wheels and torque the lug nuts to the wheel manufacturer’s specifications.
For warnings and disclaimers, visit Dirt King Disclaimer.
